10mm x 1.25 would use the Ball Stud BaseĭIRTBIKE: If you are ordering mirrors for a bike that did not originally have them you will need to add a threaded clamp to thread the mirror into.If it is mounted through the perch with a nut on the bottom, choose the RAM-367U 8mm base (you will reuse the nut). This base comes with a 45mm, 60mm, 70mm and 80mm bolt as well as two different spacers. If your bike takes an 8mm base, select RAM-B-367U 8mm base. To do this, remove the existing mirror and check the threads (8mm, 10mm x 1.25, or 10mm x 1.5). If you’d like, you can also add the Base Extension to the left side, however that is not necessary.īMW: To ensure that you get parts that fit your bike, the best approach is to measure what you have. NOTE: On the right side, the standard mirror has reverse (right hand) threads so you will also need the Yamaha Adapter for mounting the mirror on the right side. YAMAHA: Uses the 10mm x 1.25 Ball Stud Base included with this assembly. The left side base is too short to clear the handguard on most models, so the Base Extension will be required. KAWASAKI: Uses the 10mm x 1.25 Ball Stud Base. If you would like more height, you can add the Base Extension (sold separately under "Extras" above).
HONDA, SUZUKI, TRIUMPH: Uses the 10mm x 1.25 Ball Stud Base. If you are adding a mirror to an RR model, you can add the horizontal split clamp which will allow you to mount the mirror to either the brake or clutch master cylinder. NOTE: KTM 390/790/990 ADVENTURE MODELS REQUIRE THE ADDITION OF THE RIGHT SIDE THREAD ADAPTER AND BASE EXTENSION (sold separately).īETA: RS models use the 10mm x 1.25 Ball Stud Base.
If you are adding mirrors to a bike that did not originally have them, you can order the horizontal split clamp (sold separately, under "Extras" above) to mount to either the clutch or brake master cylinder. KTM & HUSQVARNA: Uses the 10mm x 1.25 Ball Stud Base. Allows mounting on clutch or brake master cylinder for most KTM, Husqvarna and many Beta motorcycles.10mm x 1.25 threaded mirror mount on horizontal split clamp.Can be used on any dirt bike, or any street bike to create or replace a mirror perch.Adapts a Ball Stud Base onto any standard 7/8 inch handlebar.Works with standard Ball Stud Base to offer clearance in some applications.Aluminum extension with 10mm x 1.25 male and female threads.Compatible with all Honda, Kawasaki, KTM, Triumph, Husqvarna, Zero and Suzuki bikes, and left side of Yamaha.Recommended for applications where the mirror will be extended most of the time, although it still folds very well.Easy to fold, remove or swap between bikes.Excellent visibility - SAE spec convex lens.Indestructible- Made from reinforced Zytel.
0 kommentar(er)
